View Single Post
  #6 (permalink)  
Old 12-24-2006, 07:39 PM
spookysco spookysco is offline
Junior Member
 
Join Date: Jul 2006
Posts: 11
Default

Finally got out, had to be pulled out though!!! I put materials under the tires for traction, stepped on the gas, nothing. No noise, no spinning, nothing... The vehicle was obviously on, this is a problem.

I can see a problem in the mountains if you go off a paved road to a dirt road which climbs up the side of the mountain and there is spinning of the tires due to loose dirt, mud etc. This would prove to be dangerous since the ICE would not run, the electric motors (as already demonstrated) will not run and the vehicle would come to a stop. And, to top things off, you're on an incline.

There SHOULD be a way to disable this and run without the "benefits" of VDIM, as there are in other vehicles which have similar systems as VDIM.

I'm afraid this is not something I did not plan for nor did I expect. Might list my HyHi for sale after the holidays.

Totally unacceptable.
Reply With Quote
 
Page generated in 0.07365 seconds with 8 queries